Here is the beginning of the end of the Circuit Slide Patch Panel. This is how we were able to have only 80 dimmers all this time. After all of this is over we will have almost 400. We will dimmer per circuit instead of trying to route power through this patch panel. Soon ryan will be able to patch via the internet sitting on his couch at home watching TV. No more yelling
It was a rather large box that used to sit upstage right. As you can see it was more about looks then about actual material.
We turned off the Transformer for the Stage Lighting which caused some problems with motors. Theoretically everything should have been fine but as we all know Theory works best on paper.
We turned off the Transformer for the Stage Lighting which caused some problems with motors. Theoretically everything should have been fine but as we all know Theory works best on paper.
Lets see a picture of Kris Shaw hoping to make the control work
Don’t worry he is just the brains behind the Upgrade but he isn’t actually doing the work
Don’t worry he is just the brains behind the Upgrade but he isn’t actually doing the work
So here is how it was fixed. Ryan and Kris figured out what part to touch so that we could bring in electrics so now tomorrow when they come in to get rid of the Asbestos cables they wont have to do it from a Genie
Don’t worry his hand is not in danger
Soon this box with wires will be gone to so the drama will end.
1200 seats are covered
Don’t worry his hand is not in danger
Soon this box with wires will be gone to so the drama will end.
1200 seats are covered
The seats have been covered with a flame proof plastic and supposedly it is dart proof as well. We havn’t tested it yet but we will assume the specs are accurate.
And Doug don’t worry we covered your seats as well but unfortuneately it is only regular plastic so if they drop darts there is not much we can do
4 comments:
what happens if you throw darts at the seats? i think you should test it. Also don't let Kris near those panels, don't you remember the flaming screwdriver incident?!?!?
There Brian goes again...spreading rumors about an ALLEGED "Flaming Screw Driver Incident".
Maybe we should rename the dimmer room? Or maybe we have a new vodka based drink.
How did it go . . . oh i remember. "Hey Kris, don't you want to turn the power off before you stick a flat head screwdriver into the patch panel to reattach the wires?" "No way, It will be fine." (Loud Bang followed by many sparks and Kris flying away from the panel)
Post a Comment